4 in stock
E3D-V6.1 Extruder right fully assembled with PT100 sensor
E3D-V6.1 Extruder right fully assembled with PT100 sensor (Rock V3.0)
PT100 Sensor housed in 3x20mm shell
Temp range -80 to +400°C
1x E3D Heat sink (10-01#03)
1x E3D heat break-2id (10-02#03)
1x E3D Heater block – 3x20mm sensor (10-03#03)
1x E3D fan duct (10-04#03)
1x E3D nozzle 0.4mm (10-06#40)
1x M3x10 flange head screw (10-09#01)
1xM3x3 set screw (10-09#02)
1x tube connector 4mm to 1/8 BSP (30-03)
1x E3D heating element (90-12#00)
1x PT100 Temperature sensor 3x20mm (90-13#00)
2x G2.8×16 Sheet metal screws (26-02)
1x Fan 30x30x10mm (93-04)
1x Silicone sock for V6 hot-end (94-11#00)
2x Tie straps (94-06)
Weight | 0.2 kg |
---|---|
Dimensions | 15 × 5 × 5 cm |
Reviews
There are no reviews yet.