Printing Specifications Value
Build volume: X 350mm.
Y 320mm.
Z 400mm.
Print / extruder heads: 2x E3D V6.0 extruder system
Print method: Fused filament extrusion
Print quality: Extreme 50 microns.
Very high 100 microns.
High 150 microns.
Normal 200 microns.
Low 250 microns.
Filament: 1.75 mm.
Extruder Nozzle diameter: 0.40mm
0.25, 0.3, 0.35, 0.6, 0.8mm (optional)
Print platform: 340x406x5mm Borosilicate glass plate.
Flatness < 0.003mm.
340 x 406 x 3mm anodised alloy plate.
Approximate flatness +/- 0.3mm.
Software Specifications Value
Software: Repetier host, Slic3r, CuraEngine, Arduino
File types: .STL / .gco / .gcode
Supported: Windows 7 and later, Mac OS X (10.6 / 10.7 / 10.8)


Electronics Specifications Value
Computer: Arduino Mega 2560 R3
Display: LCD 12864 with SD-card socket
Interface: Ramps 1.4
Stepper Drivers: A4988
End stops: Optical end stop (Opto-coupler)
X, Y, Z Axis stepper motors: 40mm 1.8° NEMA 17 – 1.7A 2.55V
1 & 2 Bowden drive stepper motors: 60mm 1.8° NEMA 17 – 1.2A 7.2V
Print bed heater switch: 40A Solid state relays
Connectivity: USB, SD card
Electrical Specifications Value
AC IN: 100 – 120 VAC / 50-60 Hz / Max 672 W
200 – 240 VAC / 50-60 Hz / Max 672 W
DC Power supply: 12 VDC / 33 A / 396 W
Print bed heater: 12V 300W silicone heater 320x390x1.5mm
Printer illumination: 2x of 500mm LED strips
Print head, extruder Illumination: 2 single LED’s (pointing to extruder nozzle)
Temperature Specifications Value
Operating temperature: 10 – 35°C (50 -95F)
Storage temperature: 0 – 35°C (32 – 95F)


Heater Warm up time Value
Print surface heater to 125°C (260F): Heating to: 80°C (176F): ~4 – 10 min (ambient temp!)
Extruder nozzles to 275°C (530F): Heating to: 200°C (392F): ~1 min
Mechanical Specifications Value
Structural components & Build platform: Laser cut aluminium sheeting 1.6 and 3.0mm, precision folded.
Laser cut Stainless steel sheeting 0.8, 1.6mm, precision folded.
X, Y axles: Hiwin precision linear bearing tracks and blocks.
Z axle: Hiwin precision linear bearing tracks and blocks.
X, Y axle’s motion: 8×16 flange bearings
8mm Linear shafts
20T pulleys
GT2 timing belts
Z axle motion: 12 mm (no play) Ball screw and nut (SFU1204)
X, Y, Z drive stepper motors: NEMA 1.7A – 40mm 1.8 deg. Angle. (1/16 micro stepping)
Filament drive stepper motors: NEMA 1.8A – 60mm 1.8 deg. Angle. (1/16 micro stepping)
Physical dimensions Value
Printer dimensions: 560mm Width.
800mm Width including filament spool holders.
680mm Height.
900mm Height including extruder connecting loop.
620mm Depth.
Printer weight: 32 Kg
Shipping weight: 37 Kg
Shipping box: DIY Kit (standard delivery method) 700 x 620 x 280mm

Approx. kit assembly / build time:

  • 3 to 5 days (depending on builder skill)

 

Assembled printer:

On special request the printer can be supplied assembled.

Shipped on a pallet (1165x1165x900mm) ~ 60Kg

The price of printer and shipping will be ~30-50% higher

 

For pricing and shipping cost contact: orders@telion.com.au