Buy 3D Printers in Toowoomba
12/12/2016
E3D PT100
E3D Extruders
21/12/2016
Show all
PT100 - Upgrade Kit for E3D Hot-End

V6.0 to V6.1 extruder (PT100) upgrade kits

The E3D V6.0 (NTC 100K) extruder can now be upgraded to the new version 6.1 (PT100) with a better temperature sensor mount. The upgraded version hot-end has been modified to contain a 3mm through hole and a grub-screw to lock the new 3x20mm-shell temperature sensors into place.

15-25#01 - E3D V6.0 to V6.1 upgrade kit PT100 3x20mm sensor (1 Extruder)

15-25#02 - E3D V6.0 to V6.1 upgrade kit PT100 3x20mm sensor (2 Extruders)

Available from:
https://telion.com.au/product/e3d-v6-0-to-v6-1-upgrade-kit-for-2-extruders-ntc100k-glass-bead-to-ntc100k-3x20mm-sensor-copy/

Dual PT100 sensor amplifier NTS-030

The E3D V6.1 - PT100 sensor connected to a computer i.e. Arduino/Ramps1.4 requires a signal amplifier

Telion NTS-030 Dual PT100 amplifier. Part No:90-16#00

Available from:
https://telion.com.au/product-category/e3d-electronics/

V6.0 to V6.1 extruder (NTC 100K) upgrade kits

The E3D V6.0 (NTC 100K) extruder can now be upgraded to the new version 6.1 (NTC100K) with a better temperature sensor mount. The upgraded version hot-end has been modified to contain a 3mm through hole and a grub-screw to lock the new 3x20mm-shell temperature sensors into place.

15-26#01 - E3D V6.0 to V6.1 upgrade kit NTC100K 3x20mm sensor (1 Extruder)

15-26#02 - E3D V6.0 to V6.1 upgrade kit NTC100K 3x20mm sensor (2 Extruders)

Available from:
https://telion.com.au/product/e3d-v6-1-right-3x20mm-pt100-sensor-copy/